Loving astronomy, and becoming a glassblower, it was only a matter of time before we would try re-creating the planets and Sun in blown glass. It is an interesting challenge to figure out the right mix of colors, the density of the colors and how big or small the chips of color (frit) need to be so that they will mix and swirl together and look like whichever planet's atmosphere.

Some planets are easier than others. Venus is pretty homogenous in color, as is Neptune. Yes, there are some mild variations, but no wild storms, no oceans and land masses and certainly no rings! OK, yes, Neptune and Uranus have some thin rings, but for the purpose of re-creating the planet in various sculptural form, their rings are usually, but not always, omitted.

But the rings of Saturn.... You just can't omit those, or it just isn't Saturn! But creating those rings when you're working in blown glass is a definite challenge. Since we want to make our Saturn sculptures more scientifically accurate, we couldn't go with just the basic gestalt of rings that comes from trying to do them from molten glass in a big blowy furnace. The way we decided would be best to showcase the planetary storms and the patterns of the rings was to do the planet itself as a blown glass piece, but to do the rings from sheet glass, using carving and etching to detail the pattern of the rings, shape and relative size.

First we decide how big we need to make the planet section of Saturn. Currently, I'm building three of these sculptures. The planet size needs to be just under 4.5". So we go out and blown the glass pieces, measuring when they're blowing larger and larger until we get the piece to be the 4.5" wide. Since Saturn itself is a bit oblate (squished), the glass piece we blow will be 4.5" wide, but a touch less tall, instead of perfectly spherical.

Here is a photo of one of the blown glass pieces that will become a Saturn sculpture:

Blown Glass Saturn without the rings

Then we work on the rings. First, we have to figure out how big to make the rings. We know from science that Saturn's rings are about 2 1/4 times the diameter of the planet, so if the planet is 4.5", then the rings will be 10" across! So we cut flat sheet glass in a 10 inch circle and then, using a ring saw (appropriate don't you think?), cut out the center 4.5" so that the blown planet that we made will juuuuust barely slide all the way into the hole.

Using a saw to Cut Saturn's Rings and center hole

We then use a vertical lathe and an etching tool, along with research data from the Cassini mission, to carve the ringplane as accurately as we can. We use the Cassini imagery so we know where to place the rings, the gaps, how far away from the planet to start the first ring, etc.

Saturn Rings with ring detail etched

When the rings have been etched, and the planet and rings have been all cleaned up and polished, we go about setting the two together. Hopefully, if the ring carving has been done right, the rings will slide over the planet and just touch and hang at the planet's equator. I know I've done my job right if the rings will sit there by themselves, but any touching will cause them to fall through. I then brace the rings at the spot where they just touch and apply a type of glue that when it cures is actually stronger than the glass! After two weeks, the rings will be forever attached to the Saturn planet and the sculpture will be complete!

Testing the fit of the rings to the Saturn

Now it just needs to sit on a lighted base to truly make it shine!

Dobby gives Saturn the Sniff Test

Related Posts

1. Making Pendants and Earrings is Fun!
2. I love these bowls….
3. Deep Carving in Glass

Over the past several months, I've gotten the love bug for cupcakes. My mom got me a book for Christmas that was all about cupcakes with different recipes and decorations and then my friend, Sandra Salamony, sent me her wonderful book, 1,000 Ideas for Decorating Cupcakes, Cookies & Cakes with glorious pictures of all sorts of different decorating ideas. Of course, I wanted to make them all in food form, but what I *really* wanted to do was to make them out of blown glass. Wouldn't that be spectacular??

Of course, I had a number of other jobs going on at the time and couldn't get to thinking about figuring out how to make cupcakes out of glass for a while, but finally, I had a little bit of free time with the kilns, so gave myself permission to give it a try. I didn't know if I could even make anything decent looking, but I wanted to know, yes or no. I gave myself two days to play with different techniques to see what could be done.

I decided the best course was a blown glass cake section and then swirl on solid glass for the icing. Making solid cupcakes will come about soon too, but since the first ones I was trying were the "jumbo" size, making them solid would use a lot of glass and weigh a ton. As it is, the blown glass ones, with the solid icing still weigh over a pound each. I first made a clear one, just to try out the techniques and see what worked best. Then, let it cool overnight and see if it actually looked good.

When I saw it the next morning, I knew I was in love! I progressed right away into making colored cupcakes. After a few days of different colors, I'm finding which colors work best with the techniques I'm using and also moving into trying some other color combinations, including translucent bright colors. Here is a trio of Chocolate with pastel sprinkles:

I really love the sprinkles! But the chocolate is dark dark, so the next day, I tried to make a lighter one. I succeeded in a darned fine Red Velvet with CreamCheese frosting:

With red sprinkles. Then the following day, my partner suggested the crystal colors, so I made several each of a few bright, but very see-through colors, so that the refraction of the glass can be seen and appreciated instead of being solid. That was just yesterday and here is how those turned out:

I must say that I just *love* making these glass cupcakes! With sprinkles! What do you think? Do you like them? Have suggestions? Please leave a comment!

Peace, Joy

Related Posts

1. I love these bowls….
2. Just like Chihuly
3. Design to Creation

I love it when things work out just right.

Ten days ago, I got a call from a lady who had seen our Baptismal Bowls website and wanted to know if we could do a custom piece for her church. The bowls on the website are large - 18 inches diameter by 5 inches deep. She needed one that was about 12 inches across by 4 inches deep. "Oh, yes!" I told her, "I can make that for you!" Here is the bowl they liked:

Within a few days, she had gotten the go-ahead from her committee and they fedexed me a check for the deposit. The bowl design they liked was one I liked and had all of the right colors for, so I didn't have to spend any time ordering glass or digging for the appropriate equipment. They were building the font to match the bowl, so I didn't have to worry about trying to make sure it would fit into a strange shape like the weird sink I tried before.

Since over that weekend, my large kiln was available, I went ahead and started the casting process on the bowl. I hadn't received their deposit check yet, but I had a good feeling about them and could certainly post the bowl elsewhere if they never came through. By the time I got their deposit check, I'd already cast the bowl and done the subsequent firings on it to get the pattern and correct shape. The day after I got the deposit, the molding of the bowl was complete. I hadn't even cashed their check yet!

I brought the bowl in and cleaned it up, set it on the counter and waited for it to dry. There were no cracks, no problem spots, no weirdnesses, no spikes on the edges.... It came out perfect, and beautiful. Yes! This is the way things ought to work. They should just *work*! Here is the final piece:

Now I can write them and tell them their bowl is already finished and they'll be delighted! Yayy!!! I love happy clients!!! Then I'll ship it down to Texas to its new home!

I love it when things just work. It's like they were meant to be. Now! On to the next project!

Peace, Joy

Related Posts

1. Sink Successes
2. Nothing Blasts Through Depression Like Success
3. Is this cool or WHAT?

A really fun part of my job is the first contact I get with a new client and they say "We're thinking of something, but we don't know what. Is that possible?" and then from there, based on their budget, the use and how wild they want to be, I get to design and create a piece of artwork that is new and truly unique.

A little bit ago, a company contacted me and wanted an award that would reflect their work in the aerospace industry. They really liked the "Earth from Space" type of awards I have created before, so we went from there and I designed this piece:

Initial design for Barrios Award

Usually I design a piece without knowing for sure how to make it or if it will actually work. Then go about the process of figuring out how to make what I've seen in my head. Of course, I keep physics in mind and know basically what is and isn't possible, so don't design floating, rotating heads or anything (although that would be fun...).

With this piece, the Earth section, I've made before for a different award, so I knew how to create that part, but the pillar it sits on was a bit of a challenge. I finally decided that the best way was to use a drop mold with a triple thickness plate. Theoretically, this would drop down the appropriate amount, and be thick enough to strongly hold up the Earth section. The Earth is a 6 inch plate, 4 layers thick and then molded into the chord section, so it is pretty heavy. They wanted the entire piece to be about 8 inches tall, so I set out to make the base.

The rough part was to get the piece to drop the appropriate amount, and be able to reproduce it nearly exactly for the second award they'd ordered. I ended up with a number of samples that went in the heat too long, so they puddled at the bottom instead of making a smooth dome. Or, they went in the heat too short of a time and didn't get enough of a pillar on them to reach the 8 inch height requirement. Putting a short one back in to heat it up a bit more doesn't work well, as the glass is then uneven, so doesn't stretch uniformly. And there is no way to shorten one that is too long.

After a number of trials, I finally got one that was Just Right! Then I set out to make the second one. It took a few tries, but finally a second one came out very similar. It was about a half inch shorter, but that's ok.

Initially, the company engraving was to be on the extended part of the pillar. After working with the samples, I was concerned because that is the thinnest part of the whole piece. To engrave into that just seemed to be asking for trouble, so I made the decision to put the engraving on the base instead. I think it looks fantastic! Here's the final result:

Barrios Award Final Glass

Barrios Award Final Glass

I shipped the two awards to their new home in Houston. I'm proud of them. I hope they're loved.

Joy

Related Posts

1. Just like Chihuly
2. Unique Gift for Christmas
3. The Bummer of Being a Commissioned Artist

It's the singular quote we hear more often from people who see our larger pieces of artwork. "Wow, it's just like Chihuly!" I used to get a little miffed at that comment, because our works are NOT just like Chihuly. Our works are our own and usually meant to depict something in particular, like the Solar System. From the many pieces I've seen of his works, they're a conglomeration of lots of littler pieces into a giant swirly piece. It's the sheer magnitude of all the pieces put together that makes it so dramatic. And *he* doesn't even do all the work himself. We do all our own work!

With our works, they're beautiful, but they also WORK! There is "Science" involved! The solar system mobile spins in orbits and the planets are blown glass made to relative scale with each other. It's a work of art, but also has quite a lot of knowledge and engineering behind it. The orrery that we build has the blown glass planets in their correct orbits, relative scale to each other and they actually rotate the correct direction and correctly scaled to each other as well! It's an impressive work of engineering, *and* a beautiful structure as well.

Then we were commissioned to build a table base. The client likes Chihuly art, so I endeavored to design something beautiful and strong enough to support her enormous tabletop. The design I came up with was this:

The Deep Sea Anemone Table

And it is beautiful. The structure of the support tubes and cross linked arms are what support the tabletop. The glass work on the structure is purely art. There is no engineering function to the glass at all. It is a conglomeration of beautiful smaller pieces that combine to make a dazzling whole. And I like it. That isn't to say that I'm going to switch and only make these random mashups from now on and drop my whole engineering background, but it was very nice to not have to construct computer drives, gearing, swivels and such in this piece. I could just focus on the beauty of the individual pieces. "Looks like Chihuly"? Thank you. I'll go raise my prices now.

Peace, Joy

Related Posts

1. Design to Creation
2. Is this cool or WHAT?
3. More USGIF Awards

I got to thinking that for the past several months, I've been discussing the failures with that sink job, both on here and on my Facebook/Twitter accounts. I've gotten comments that maybe I shouldn't spend my time making sinks. Well, it isn't that I *can't* make sinks, it's that I couldn't make *those* sinks as they had to fit a very precise position in the client's countertop.

*Her* sinks had to be made extra thick in sections, a little wider on this part, flat over here, dropped straight down on this side, curved on this other side, etc...... I wasn't allowed to alter her old 70's countertop at all. It wasn't even a particularly *nice* countertop, she just didn't want to futz with anything more than what was obviously (to her) a very simple project of going back to my studio, picking two matching bowls out of the perfectly sized bowls from my huge selection of stock, quickly popping the drain and faucet holes into them, and dropping them into her counter, sealed and ready for use! Should have taken me maybe a week at the most, according to her.

When I'm not faced with these insurmountable restrictions, I'm quite able to make large scale bowls that are gorgeous and would work wonderfully as sinks.

This one uses a great "splashy" technique which looks like the color is boiling up through the glass. Makes for a great looking sun! It's 18" in diameter, 5" deep.

I think this one would be a divine sink - the colors are gorgeous and the shape is shallow, wide and elegant. This one uses the splashy technique too. I like the look of it, as it's not the standard. It takes more time and effort, but for the client who doesn't want to buy off the shelf at home depot, this uniqueness is well worth it. It's also 18" in diameter, but 4 1/2" deep.

This bowl is beautiful. The gentle pink background with the blues and purples dancing through are mesmerizing. Put in a white bathroom, with accents of the matching blue and pink would be spectacular. 18" in diameter, 5" deep. Of course, any of these don't *have* to be sinks at all. They make perfect bowls already, just... you know... wanted to show that I *CAN* make sinks

Related Posts

1. Nothing Blasts Through Depression Like Success
2. How Things Ought to Work!
3. The Definition of Insanity

After working for a number of months, in vain, trying to create two matching cast glass sinks for a client, that would fit into her already made countertop, she canceled the project. I was having failure after failure with those darned sinks - getting the colors to match what she wanted, then trying to get the cast piece to drop through a mold to the right shape for her countertop, faucet and knobs.

It was difficult. Each attempt took 6-10 days to heat up each section, cool it back down and then move on to the next step. After each step, I would brace myself to go out to look in the kiln. Most of the time, the piece would be perfect until the final forming step and then have a catastrophic failure from unknown causes. I was spiraling down into serious depression, questioning my ability and even if I wanted to continue as an artist at all.

When she canceled, you'd think that I would be crestfallen, more depressed, but in fact the exact opposite happened. I was relieved, reborn and re-ignited with hope, creativity and enthusiasm. My mind started bubbling with all the projects that had been on hold for so long. New projects burst into my head. I was ready to fire the kiln up again.

And when I did... Fear struck. What if I actually *HAD* lost my ability? What if all the previous good stuff was flukes and I was out of ideas and luck? I took deep breaths and hit the on switch.

As I peaked in to check after the final firing, I burst into insane giggling, smiling from ear to ear. A success, yes, but what a beauty as well.

13 Inch Fused Glass Galaxy Platter

13 Inch Fused Glass Galaxy Platter - Oblique

Getting this gorgeous piece to come out, with it's beautiful colors, it's perfect shape and nary a problem in sight has given me a giddiness that I haven't felt in a loooong time. I've plunged back in to actively marketing our works, and also in creating more different types of pieces for a wider audience. I would love to hear your comments on this piece, or the process. Please leave a comment.

Now, on to more pieces!!!

Related Posts

1. Sink Successes
2. How Things Ought to Work!
3. Why I Like Working in Glass

It was only a matter of time before our skills producing the blown glass planets for our mobiles, orrery, sculptures and ornaments would join up with our new line of wine bottle stoppers.

We decided to couple the two and make Planetary Wine Bottle Stoppers. We figured the techniques would be pretty much identical, so it would be a breeze! Wrong! The various planetary glass pieces we've blown before were hollow, and blown out much bigger. We had to decorate the pieces while they were still fairly small, but then as they blew out, the details would get larger and look like what it was supposed to look like.

With these bottle stoppers, first they had to be solid glass so that they would be heavy and strong enough to endure handling, dropping, tipping over, etc. Then, they had to be decorated while they were small, but then didn't get blown larger. The details had to remain small and still be clear about what they were. That's where the hard part came in.

It took us a number of days and a number of failures before we finally came up with a good way to decorate the tiny little molten blobs of glass. What we finally were able to start making, though, were just spectacular.

Dense Clouds Earth Wine Stopper

These will make fantastic Christmas gifts, as they're small, less expensive and quite unique. The stoppers themselves are stainless steel, so won't corrode, rust or pit. And since each one is handmade by myself and my partner, they're original, signed works of art, each being completely unique in the universe.

So far we've created Earth, Mars and Venus.

Planetary Mars Wine Stopper

Planetary Venus Wine Stopper

We will most likely also make Jupiter, Neptune, and Uranus for Christmas gifts. Saturn will take a bit more work til I'm comfortable with making durable rings, but.. How hard can it be? so those will come too.

Do you like these? Would you like to get some as gifts? They're on our website - Planetary Bottle Stoppers or contact me directly for special orders or quantities.

And, as always, let me know your thoughts about these or other works of ours. We can only grow as artists if we know what YOU like.

Peace, Joy

Related Posts

1. Micro Planets
2. The Trouble Is….
3. More Amazing Wine Stoppers

The new jewelry line came about fairly rapidly, but the website for them took a little longer (isn't that always the case?). The site is now LIVE! - http://glasssculpture.org/artglass/jewelry/

We decided to add it to our Glass Sculpture site, since the technique doesn't match up with my Reverse Glass painting, nor does it follow the techniques used in the art glass marbles & paperweights.

We're branching out so much even we get confused sometimes! :) But it's all good.  So far, we have wondrous pendants:

Iris Pendant

and captivating Earrings:

Grass Earrings

We'll  be adding more types of jewelry, along with more different styles. The pieces up so far are just the beginning. We're so enthused about working like this that we're coming up with a lot of different ideas that we'll be trying out. In fact, we're going to be trying some of them *today* out in the hot shop. I'll be tweeting while we're blowing glass, so please follow along!

http://twitter.com/Joy_Alyssa_Day

If you stop by, say hi and ask a question about us, our shop, glassblowing, etc... We'll also be making some outrageous samples for a commission we are currently working on for a beautiful chandelier style table base.

Hanna Table

Hope you enjoy it, if you stop by.

Peace,

Joy

Related Posts

1. Website Building is Not My Thing
2. Making Pendants and Earrings is Fun!
3. Torchwork Earrings

As we continue our orrery project, it is time to blow the glass planets. As the whole piece is only 6 feet in diameter, that means we have less than 3 feet to fit in 8 planets (they didn't want Pluto).  To get the planets to fit, be relative scale (impossible to be "actual" scale), and not clunk into each other, the inner planets need to be fairly small.

BJ modeled the entire sculpture in LightWave to get the exact sizing of every single element in the whole piece, and to make sure it would all fit together and work like it's supposed to. So I can take the printouts of various parts of his model and tool the pieces to those exact sizes. In blowing the glass planets, the model shows that the inner planets are all one inch or less across. We have the larger 3 of the inner planets blown now (Mercury is too small - it will be made like a bead with the torch instead).

While we're blowing planets, we warm up by blowing a few rocket ships. This photo is the last five days worth of our glassblowing sessions:

Lots of Rockets and Planets

Lots of rocket ships, in some really great colors. The light green rocket is laying on top of a bunch of Venuses, and there is a set of Venuses off to the right that came out just too big. Here is a closeup of the swirled green rocket:

Green Swirled Rocket

The Earths and Marses have some really nice clouds and polar caps. The Venuses just show the swirling clouds.

Here are the best rocky planets in size, shape and color in my hand for scale. Earth is one inch across.

Venus, Earth and Mars

They'll take a little cleanup work at the bases where they cracked off the pipe, but then will be attached to the carbon fiber arms of the orrery. We've moved on to Uranus now. The green rocket and piece on the far right of the upper images are our color tests. The colors of the rocket are just about right for Uranus, so we'll blow about 6-10 of those today and then move to Neptune if we have time today.

I send out tweets during our glassblowing sessions, and hopefully, the camera will be working today or very soon. If you'd like to follow me, http://twitter.com/Joy_Alyssa_Day and please leave a comment here about our micro planets and rockets.

Peace,

Joy

Related Posts

1. Unique Gift for Christmas
2. Is this cool or WHAT?
3. Beauty in glass